Product details

Rags, White 100% Cotton NA.NA.23 29 07
Waste Item spec: Waste: Cotton white sterilized Cat name:IMPA. Cat no:23 29 01. Waste NA.NA.23 29 01
GLOVES, COTTON WORKING ORDINARY NA.NA.19 01 01
“Battery Chargers. Output AC Power:
Voltage 6-35 v, Ampere 20A. Input
DC Power: Voltage 100 v, Ampere
12.0A” NA.NA.79 26 53
“Torque Tools/Torque Wrenches,
preset type, CAPACITY (MINIMUM
20 to MAXIMUM 100) N.m-cm. Sq.
Drive 12.7mm” NA.NA.61 14 39
“Torque Tools/Torque Wrenches.
Torque wrench, preset type,
CAPACITY (MINIMUM 60 to
MAXIMUM 420) N.m-cm. Sq. Drive
19.0mm” NA.NA.61 14 33
Hand Snips NA.NA.61 17 74
Calf Skin Working Gloves NA.NA.19 01 12
“Pressure Reducing Valve (15 DIN)
with threaded connection.
Stainless steel. Type of Pressure
Rating LOW STANDARD.
Control pressure from 0.5 kg” NA.NA.75 69 19
Pneumatic Vakuum Cleaner V 300 hose 25mm suction capasity 1,2m3 NA.NA.59 07 21
“Water Activated Fiberglass Tapes
for Pipe Repair” NA.NA.81 24 51
“Syntho -Glass. 5,08sm/1.524m
Weicon UW Cream Wet Surface” NA.NA.81 23 34
Devcon Stainless Steel Putty (ST) NA.NA.81 22 92
Silicone Gaskets NA.NA.81 26 71
“GUN FOR SILICONE SEALANT (350 GR)
TABANCA BIR ADET KULLANIMDA VARDIR VE ESKI DURUMDADIR.” NA.NA.81 26 03
Teflon Seal Tape,Width 20mm,Thick 0.1mm,10mtrs/Roll NA.NA.81 25 02
Adjustable Pipe Repair Clamps 10 pcs/case NA.NA.81 23 66
“Pilot Non-Asbestos
Jointing Pilotseal 172. 1
x1.500×1.500 mm” NA.NA.81 12 82
“Pilot Non-Asbestos
Jointing Pilotseal 172.
1.5×1.500×1.500 mm” NA.NA.81 12 84
“Pilot Non-Asbestos
Jointing Pilotseal 172. 2x
1.500×1.500 mm” NA.NA.81 12 83
“Pilotpack 67 Packings
for Sea and Fresh Water, 5mm” NA.NA.81 07 02
“Pilotpack 67 Packings
for Sea and Fresh Water, 6.5mm” NA.NA.81 07 03
“Pilotpack 67 Packings
for Sea and Fresh Water, 8mm” NA.NA.81 07 04
Ball Bearing. 6309ZZ C3 NA.NA.77 07 60
Ball Bearing. 6209ZZ C3 NA.NA.77 06 10
“Globe valve (DIN), bronze, BSP
female threaded, threaded bonnet,
STRAIGHTб , SIZE DN 3/8″” NA.NA.75 51 02
“Globe valve (DIN), bronze, BSP
female threaded, threaded bonnet,
STRAIGHTб , SIZE DN ½″” NA.NA.75 51 03
“Globe valve (DIN), bronze, BSP
female threaded, threaded bonnet,
STRAIGHTб , SIZE DN ¾″” NA.NA.75 51 04
“Globe valve (DIN), bronze, BSP
female threaded, threaded bonnet,
STRAIGHTб , SIZE DN 1″” NA.NA.75 51 05
Ball valve NA.NA.75 24 01
Ball valve NA.NA.75 24 02
“Forged Brass Screwed End
Ball Valves. ¾″” NA.NA.75 24 03
“Forged Brass Screwed End
Ball Valves. 1″” NA.NA.75 24 04
“Screw Down Check Globe Valves.
Bronze,16 kg/cm2, SIZE- 15. Face to
Face 110, Flange Diam, -95. Flange
Bolt Hole : Pitch- 70, Number-4,
Hole-15. F-7409” NA.NA.75 10 01
“Screw down check valve, ANGLE,
bronze,
5 kgf/cm2, SIZE 32, Face to Face-
80, Flange Diam.-115, Flange Bolt
Hole: Pitch- 90, Number- 4, Hole-
15mm, Angle Valve F-7352” NA.NA.75 10 64
BRASS FLARES UNIONS 6 MM NA.NA.73 40 22
BRASS FLARES MALE CONNECTION 6MM NA.NA.73 40 03
BRASS FLARES MALE CONNECTION 8MM NA.NA.73 40 05
“Brass flareless union tee, TUBE 0.0-
6mm, NUT THREAD SIZE- ¼” NA.NA.73 40 62
“Brass Sleeves
for Flareless Tube Fitting. Tube OD-
6mm, Length-9mm” NA.NA.73 41 02
“Brass Nuts for Flareless
Tube Fitting, OD-6mm, Nut Thread-
12-1,5” NA.NA.73 41 12
“Abrasive Wheels, Straight, A,
200x25x32, Grain size 150, Max peed
3000 m/min” NA.NA.61 48 20
Brass Threaded Unions. Size-1/8″ NA.NA.73 22 61
Brass Threaded Unions, Size ½″ NA.NA.73 22 62
Brass Threaded Unions. Size 3/8″ NA.NA.72 22 63
Brass Threaded Unions. Size ¾″ NA.NA.72 22 64
Brass Threaded Unions, Size 1″ NA.NA.72 22 65
“Needle File Sets. LENGTH- 215 mm,
5 PCS Set, 2nd Cut” NA.NA.61 45 31
“Abrasive Wheels, Straight, A,
200x25x32, Grain size 150, Max peed
3000 m/min” NA.NA.61 48 20
“Abrasive Wheels, Straight, A,
200x25x32, Grain size 150, Max peed
3000 m/min” NA.NA.61 48 20
Brass Threaded Caps. Size 3/8″ NA.NA.73 21 78
Brass Threaded Caps. Size. ½″ NA.NA.73 21 79
Brass Threaded Caps. Size, ¾″ NA.NA.73 21 80
Brass Threaded Caps. Size 1″ NA.NA.73 21 81
“Square Head Steel Threaded Plugs.
¾″” NA.NA.73 17 80
“Square Head Steel Threaded Plugs.
1″” NA.NA.73 17 81
Copper Tubes (5.5mtrs) NA.NA.71 14 04
“Copper tube, seamless, 8 mm, 1.2
mm, 10 mtr” NA.NA.71 14 11
“Bolt, hex head, steel, ungalv., half
threaded, m5x60mm” NA.NA.69 01 67
“Bolt, hex head, steel, ungalv., half
threaded, m6x40mm” NA.NA.69 01 93
“Bolt, hex head, steel, ungalv., half
threaded, m8x40mm” NA.NA.69 02 23
Hexagon Nuts m6x40 NA.NA.69 28 04
Hexagon Nuts m8x40 NA.NA.69 28 05
“Resistance Thermometer,
screw-in type with
interchangeable insert
1810- Type BM” NA.NA.65 25 60
“Thermalimager, Range: -30°C to
650°C” NA.NA.65 27 55
“Pressure gauge, glycerin filled ,round
rim case
Vibration service Square shank
PF3/8”, diam. 75 mm,
0 – 15 kgf/cm2” NA.NA.65 15 16
“Pressure gauge. BottomConnection
with Back Flange. Pressure range
0-6 kgf/cm2, PF – 3/8”, diam. 75 mm” NA.NA.65 31 67
“Pressure gauge. Bottom Connection
with Back
Flange. 0-400, PF – 1/4”,” NA.NA.65 31 93
“Pressure gauge. Bottom Connection
with Back
Flange. 0-600” NA.NA.65 31 98
“Precision Flat Try Squares. Size mm:
1
st. Grade
50 x 40” NA.NA.65 09 36
Cylinder head with inlet & exhaust valve (Note: Exh. Seat ring with two o-ring) WARTSILA.6L20.120025
“Non-Spark 12 Point Double 10×13
End Wrenches” NA.NA.61 55 14
“Non-Spark 12 Point Double 12×14
End Wrenches” NA.NA.61 55 15
“Precision Flat Try Squares. Size mm:
1
st. Grade
50 x 40” NA.NA.65 09 66
WATER FINDING PASTE (İSKANDİL MACUNU) NA.NA.65 08 90
Gasoil Finding Paste NA.NA.65 08 91
OIL GAUDING TAPE(20 mtr) White Tape NA.NA.65 08 52
Vernier Caliper NA.NA.65 05 04
“Outside Micrometers with Counter.
Graduated in 0.01 mm. Range 25-
59mm” NA.NA.65 03 41
Valve Seat Cutters NA.NA.63 34 51
“Screw Plate Sets (Stocks & Dies) For
Metric Coarse.
Model OK 140 (1/4,-1 ¼″)” NA.NA.63 22 37
“Screw Plate Sets (Stocks & Dies) For
Metric Coarse Threading.
Model F48 (M – 3, 4, 5, 6, 7, 8, 9,10)” NA.NA.63 22 10
“Non-Spark 12 Point Double 14×17
End Wrenches” NA.NA.61 55 16
“Non-Spark 12 Point Double 17×19
End Wrenches” NA.NA.61 55 17
“Non-Spark 12 Point Double 17×21
End Wrenches” NA.NA.61 55 18
“Non-Spark 12 Point Double 19×21
End Wrenches” NA.NA.61 55 19
“Non-Spark 12 Point Double 21×26
End Wrenches” NA.NA.61 55 20
“Non-Spark 12 Point Double 26×32
End Wrenches” NA.NA.61 55 21
“Non-Spark 12 Point Double 32×35
End Wrenches” NA.NA.61 55 22
“Stainless Steel Ratchet Handles
for Socket Wrenches” NA.NA.61 68 81
Rachet handles NA.NA.61 68 82
Drill sets Steel case NA.NA.63 02 55
PIPE WRENCH 200MM NA.NA.61 13 02
Pipe Wrenches NA.NA.61 13 04
“Open & 12 Point Box Wrench Sets .
15° Angle Open End-12 Point
Opening Box End. Contents &
opening mm (8×8, 10×10, 12×12,
13×13, 14×14, 17×17,19×19,
21×21,22×22, 24×24 ) 10’s” NA.NA.61 05 31
RATCHET HANDLES, NA.NA.61 04 05
COMPACT GAS TORCHES (COMPLETE SET) NA.NA.61 70 16
SPARE GAS CARTRIDGE NA.NA.61 70 17
“90° Angle Thermometers, SIKA,
2728, casing size, 200 x 36 mm,
immersion length 63 mm, catalogue
No.2722-351106321, 0- 100,” NA.NA.65 20 04
“90° Angle Thermometers, SIKA,
2728, casing size, 200 x 36 mm,
immersion length 63 mm, catalogue
No.2722-351106321, 0- 160,” NA.NA.65 20 07
“Pressure Gauges, Rear Connection
with Direct Mounting. (Fig. 3). D- 63,
Range 0-4 Kg/cm². G ¼″” NA.NA.65 32 13
“Pressure Gauges, Rear Connection
with Direct Mounting. (Fig. 3). D- 63,
Range 0-6 Kg/cm². G ¼″” NA.NA.65 32 16
“Pressure Gauges, Rear Connection
with Direct Mounting. (Fig. 3). D- 80,
Range 0-6 Kg/cm². G ½″” NA.NA.65 32 17
“Pressure Gauges, Rear Connection
with Direct Mounting. (Fig. 3). D- 80,
Range 0-4 Kg/cm². G ½″” NA.NA.65 32 14
“Pipe Wrenches Bahco. Universal Pipe
Wrench. Length mm- 280.
Max Opening 36mm.
Bahco Type No. 141” NA.NA.61 61 12
“Pipe Wrenches Bahco. Universal Pipe
Wrench. Length mm- 370.
Max Opening 52mm.
Bahco Type No. 142” NA.NA.61 63 14
“Non-Spark Side Cutting Plie. Length
mm 180.” NA.NA.61 58 67
“Non-Spark Ball Pein Hammers.
Nominal Size ½″. Weight 225 grm.” NA.NA.61 57 02
“Non-Spark Ball Pein Hammers.
Nominal Size 1″. Weight 453 grm.” NA.NA.61 57 04
“Non-Spark Double Face Hammers
with Handle. Nominal Size 5. Weight
2.27 kg” NA.NA.61 57 32
“Non-Spark Double Face Hammers
with Handle. Nominal Size 12. Weight
5.45 kg” NA.NA.61 57 36
“Machinist Files. Triangle. Cut-Second
Cut. Length- 200mm” NA.NA.61 44 23
“Milling Vises. Milling F Type. Jaw –
153x112x43. (Fixed Base)- 465 x 183
x 109” NA.NA.61 37 43
Punching tool sets 16 pcs Punching dies (6,7,8,9,10,11,12,16,19,22,25,28,32,35,38.) NA.NA.61 30 56
“Weicon Cable & Wire Strippers.
Model – Cable Stripper S4-28 Multi” NA.NA.61 17 31
“Electric Blowers / Exhausters. Model-
EFI75. Motor 115V” NA.NA.59 15 01
“Jig saw, electric portable, CUTTING
CAPACITY – 13 mm, POWER – AC
110V Single Phase, MODEL BOSH” NA.NA.59 11 86
Spare Blades For Electric Jig Saws NA.NA.59 11 73
(+) PHILIPS SCREW DRIVER 150MM NA.NA.61 22 75
Screwdriver plastic handle( no.4-200) NA.NA.61 22 76
“Vise Grip Combination Pliers (Mole
Grip Wrenches). Length 175 mm” NA.NA.61 16 42
SINGLE HEAD RACHET 17 NA.NA.61 10 30
SINGLE HEAD RACHET 19 NA.NA.61 10 31
“Wrenches, Double or Single Head.
Ratchet 12 Point. Opening. 21 Mm.
Overall Length 290 mm.” NA.NA.61 10 32
“Wrenches, Double or Single Head.
Ratchet 12 Point. Opening. 22 Mm.
Overall Length 290 mm.” NA.NA.61 10 33
SPARE BLADE FOR ELECTRIC JIG SAW NA.NA.59 11 77
“Electric Bench Grinders. Wheel Size
mm205 x 19 x 15.88. Motor 600 w.
AC 110V Sin.11te Phase. For Wheel
Diam 205mm” NA.NA.59 10 52
CORDLESS DRILL DRIVER NA.NA.59 09 01
“High Pressure Cleaners Air Powered
Heavy Duty. Power Supply AC 110V.
1 ph 60Hz. Model C-11OE. Power
Consumption 2 .2 KW . Working
Pressure 110 bar” NA.NA.59 08 57
“Wire Brushes, Standard Handle.
Straight Handled Standard Length
270 mm” NA.NA.51 06 60
Brush Counter Black Hair NA.NA.51 06 46
“Paint Roller with Handle. Nylon. Size
mm. 100.” NA.NA.51 03 01
“Spare Paint Roller. Replacements.
Nylon. Size 100 mm.” NA.NA.51 03 49
“Wrenches, Double or Single Head.
Ratchet 12 Point. Opening. 22 Mm.
Overall Length 310 mm.” NA.NA.61 10 34
“Wrenches, Double or Single Head.
Ratchet 12 Point. Opening. 27 Mm.
Overall Length 330 mm.” NA.NA.61 10 36
SINGLE HEAD RACHET 30 NA.NA.61 10 37
SINGLE HEAD RACHET 32 NA.NA.61 10 38
OPEN 12 POINT BOX WRENCH SET 15 ANGLE OPEN END WRENCHES SET NA.NA.61 05 34
Pneumatic drun pumps, type: TO, hose: Ø32mm x 3M NA.NA.59 16 53
“Plastic Diaphragm Pumps.
Husky.515. Connection Size ½″.” NA.NA.59 17 67
“Non-Spark 12 Point Double 10×12
End Wrenches” NA.NA.61 55 13
ANGLE RADIATOR BRUSH 25 MM NA.NA.51 01 65
Flat Paint Brushes. Width 25 mm. NA.NA.51 01 01
“Door closer, parallel type, LEFT OR
RIGHT HAND USE,
MAXIMUM DOOR WEIGHT 60-
80(kgs)” NA.NA.49 06 24
“Faceshield, with forehead protection.
Standard” NA.NA.33 11 44
“Spare shield, polycarbonate, for
forehead protection type faceshield” NA.NA.33 11 48
PLASTIC CHIPPING GOOGLE ANTI FOG NA.NA.33 11 42
“Rechargeable LED Hand Lamps.
Model- XT-50” NA.NA.33 06 12
Air Dusster Long Nose NA.NA.27 06 12
Air Dusster Long Nose NA.NA.27 06 13

Get Inquiry

Product details

Contact number
+86 13303352133

Email
sales@hyundai-man.com

Address
Shanghai global financial center 20-8

Scroll to Top