101268J-IMPA

IMPA STORES “DRILL H.S.S. STRAIGHT SHANK, TWIST 1.0MM, THE DRILLS
ARE OF THE CORRECTIONAL TWO-FLUTE DESIGN WITH
HELIX ANGLES, FLUTE AND POINT SHAPES SELECTED
FOR GENERAL PURPOSE APPLICATIONS. THEY MAY BE
USED VERY SUCCESSFULLY IN CAST IRON, STEEL
FORGING AND OTHER MATERIALS” NA.NA.630108
IMPA STORES DRILL H.S.S. STRAIGHT SHANK, TWIST 1.5MM NA.NA.630113
IMPA STORES DRILL BITS (2 MM) NA.NA.630118
IMPA STORES “DRILL H.S.S. STRAIGHT SHANK, TWIST 2.3MM, THE DRILLS
ARE OF THE CORRECTIONAL TWO-FLUTE DESIGN WITH
HELIX ANGLES, FLUTE AND POINT SHAPES SELECTED
FOR GENERAL PURPOSE APPLICATIONS. THEY MAY BE
USED VERY SUCCESSFULLY IN CAST IRON, STEEL
FORGING AND OTHER MATERIALS.” NA.NA.630121
IMPA STORES “DRILLS STRAIGHT SHANK TWIST
DRILL H.S.S. STRAIGHT SHANK, TWIST 2.5MM ” NA.NA.630123
IMPA STORES 电钻钻头 NA.NA.630128
IMPA STORES DRILL BIT- HSS, 4MM NA.NA.630138
IMPA STORES STRAIGHT SHANK TWIST DRILLS NA.NA.630140
IMPA STORES STRAIGHT SHANK TWIST DRILLS NA.NA.630148
IMPA STORES Straight shank twist drill, size dia-5.0, 5.5, 6.0, 6.5, 7.0, 7.5 & 8.0 NA.NA.630163
IMPA STORES DRILL H.S.S. STRAIGHT SHANK, TWIST 6.7MM, Ordered from catalog IMPA: 630165 NA.NA.630165
IMPA STORES DRILL BIT- HSS, 8.5MM NA.NA.630183
IMPA STORES DRILL BIT- HSS, 10.5MM NA.NA.630199
IMPA STORES Straight shank twist drill sets,high speed steel,range of size 1.5mm-6.5mm,set contents 13’s, NA.NA.630253
IMPA STORES DRILL SET HSS STRAIGHT SHANK1-13MM 25PCS WHITE DRILL NA.NA.630255
IMPA STORES MORSE TAPER SHANK TWIST DRILLS, HIGH SPEED STEEL, DIA. 13.5MM NA.NA.630308
IMPA STORES MORSE TAPER SHANK TWIST DRILL HSS 14.0mm NA.NA.630309
IMPA STORES DRILL H.S.S. MORSE TAPER SHANK TWIST 14.5MM NA.NA.630310
IMPA STORES MORSE TAPER SHANK TWIST DRILL HSS 15.0mm NA.NA.630311
IMPA STORES MORSE TAPER SHANK TWIST DRILLS, HIGH SPEED STEEL, DIA. 15.5MM NA.NA.630312
IMPA STORES MORSE TAPER SHANK TWIST DRILL HSS 16.0mm NA.NA.630313
IMPA STORES DRILL H.S.S. MORSE TAPER SHANK TWIST 16.5MM NA.NA.630314
IMPA STORES MORSE TAPER SHANK TWIST DRILL HSS 17.0mm NA.NA.630315
IMPA STORES MORSE TAPER SHANK TWIST DRILLS, HIGH SPEED STEEL, DIA. 17.5MM NA.NA.630316
IMPA STORES MORSE TAPER SHANK TWIST DRILL HSS 18.0mm NA.NA.630317
IMPA STORES MORSE TAPER SHANK TWIST DRILLS, HIGH SPEED STEEL, DIA. 18.5MM NA.NA.630318
IMPA STORES MORSE TAPER SHANK TWIST DRILLS, HIGH SPEED STEEL, DIA. 19MM NA.NA.630319
IMPA STORES MORSE TAPER SHANK TWIST DRILLS, HIGH SPEED STEEL, DIA. 19.5MM NA.NA.630320
IMPA STORES DRILL H.S.S. MORSE TAPER SHANK, TWIST 20.0MM NA.NA.630321
IMPA STORES DRILL H.S.S. MORSETYPESHANKTWIST 20.5MM NA.NA.630322
IMPA STORES MORSE TAPER SHANK TWIST DRILLS, 21MM NA.NA.630323
IMPA STORES DRILL H.S.S. MORSETYPESHANKTWIST 21.5MM NA.NA.630324
IMPA STORES MORSE TAPER SHANK TWIST DRILLS, 22MM NA.NA.630325
IMPA STORES DRILL H.S.S. MORSE TAPER SHANK, TWIST 23.0MM NA.NA.630327
IMPA STORES DRILL H.S.S. MORSETYPESHANKTWIST 24.0MM NA.NA.630329
IMPA STORES DRILL H.S.S. MORSETYPESHANKTWIST 25.0MM NA.NA.630331
IMPA STORES DRILL H.S.S. MORSETYPESHANKTWIST 26.0MM NA.NA.630333
IMPA STORES 630337 DRILL H.S.S. MORSE TAPER SHANK TWIST 28.0MM NA.NA.630337
IMPA STORES MORSE TAPER SHANK TWIST DRILLS NA.NA.630341
IMPA STORES DRILL H.S.S. MORSE TAPER SHANKTWIST 32MM****WERKO GERMANY*** NA.NA.630345
IMPA STORES CENTER DRILLS A-TYPE NA.NA.630503
IMPA STORES Center drills, A TYPE,drill diam 4.0mm,body diam 10mm,angle 60 deg. NA.NA.630506
IMPA STORES STEP DRILLS 4-20MM NA.NA.633802
IMPA STORES STEP DRILLS 6-42MM NA.NA.633804
IMPA STORES TAP HAND METRIC COARSE, M3.0XP0.50MM 3’S CARBON STEEL NA.NA.631013
IMPA STORES TAP HAND METRIC COARSE, M4.0XP0.70MM 3’S CARBON STEEL NA.NA.631015
IMPA STORES Matric coarse thread hand tap 3’s/Set( M→5, M→6, M→12) NA.NA.631017
IMPA STORES Matric coarse thread hand tap 3’s/Set( M→5, M→6, M→12) NA.NA.631018
IMPA STORES HAND TAP,METRIC COARSE,CARBON STEEL,M8.0,PITCH 1.25MM,3’S/SET NA.NA.631020
IMPA STORES METRIC COARSE THREAD HAND TAPS, HIGH SPEED STEEL, 3’S/SET, M10 NA.NA.631022
IMPA STORES Matric coarse thread hand tap 3’s/Set( M→5, M→6, M→12) NA.NA.631024
IMPA STORES METRIC COARSE THREAD HAND TAPS, HIGH SPEED STEEL, 3’S/SET, M14 NA.NA.631025
IMPA STORES M16X2 METRIC COARSE THREAD HAND TAP,3’S SET NA.NA.631026
IMPA STORES METRIC COARSE THREAD HAND TAPS, HIGH SPEED STEEL, 3’S/SET, M18 NA.NA.631027
IMPA STORES METRIC COARSE THREAD HAND TAPS, HIGH SPEED STEEL, 3’S/SET, M20 NA.NA.631028
IMPA STORES METRIC COARSE THREAD HAND TAPS, HIGH SPEED STEEL, 3’S/SET, M22 NA.NA.631029
IMPA STORES METRIC COARSE THREAD HAND TAPS, HIGH SPEED STEEL, 3’S/SET, M24 NA.NA.631030
IMPA STORES METRIC FINE THREAD HAND TAPS, HIGH SPEED STEEL, 3’S/SET, M10 NA.NA.631123
IMPA STORES METRIC FINE THREAD HAND TAPS, HIGH SPEED STEEL, 3’S/SET, M12 NA.NA.631127
IMPA STORES METRIC FINE THREAD HAND TAPS, HIGH SPEED STEEL, 3’S/SET, M12 NA.NA.631128
IMPA STORES METRIC FINE THREAD HAND TAPS, HIGH SPEED STEEL, 3’S/SET, M14 NA.NA.631130
IMPA STORES METRIC FINE THREAD HAND TAPS, HIGH SPEED STEEL, 3’S/SET, M16 NA.NA.631134
IMPA STORES METRIC FINE THREAD HAND TAPS, HIGH SPEED STEEL, 3’S/SET, M18 NA.NA.631139
IMPA STORES METRIC FINE THREAD HAND TAPS, HIGH SPEED STEEL, 3’S/SET, M20 NA.NA.631142
IMPA STORES TAP HAND METRIC FINE M22X1.5MM 3’S CARBON STEEL ****** NEUBRO NA.NA.631145
IMPA STORES TAP HAND METRIC FINE M24X1.5MM 3’S CARBON STEEL****SKE JAPAN**** NA.NA.631148
IMPA STORES “TAP STRAIGHT FOR STRAIGHT PIPE, THREAD G1/8X28T
HSS” NA.NA.631452
IMPA STORES “TAP STRAIGHT FOR STRAIGHT PIPE, THREAD G1/4X19T
HSS,” NA.NA.631453
IMPA STORES “TAP STRAIGHT FOR STRAIGHT PIPE, THREAD G3/8X19T
HSS” NA.NA.631454
IMPA STORES 631455 TAP STRAIGHT FOR STRAIGHT PIPE THREAD G1/2X14T HIGH SPEED STL ` NA.NA.631455
IMPA STORES 631457 TAP STRAIGHT FOR STRAIGHT PIPE THREAD G3/4X14T HIGH SPEED STL NA.NA.631457
IMPA STORES “TAP STRAIGHT FOR STRAIGHT PIPE, THREAD G1X11T
HIGH SPEED STEEL” NA.NA.631459
IMPA STORES “TAP STRAIGHT FOR STRAIGHT PIPE, THREAD G1-1/4X11T
HSS” NA.NA.631461
IMPA STORES TAP STRAIGHT FOR STRAIGHT PIPE THREAD G1-1/2×11THREAD SKH NA.NA.631462
IMPA STORES METRIC COARSE THREAD DIES NA.NA.631713
IMPA STORES METRIC COARSE THREAD DIES NA.NA.631715
IMPA STORES METRIC COARSE THREAD DIES NA.NA.631717
IMPA STORES ELBOW STEEL 90DEG 3/8 THREADED, FOR H.P. PIPE FITTING NA.NA.731718
IMPA STORES ELBOW STEEL 90DEG 3/4 THREADED ; FOR H.P. PIPE FITTING;IMPA Catalogue NA.NA.731720
IMPA STORES “ELBOW STEEL 90DEG 1-1/4, THREADED FOR H.P. PIPE
FITTING, HIGH PRESSURE, DROP FORGED STEEL,
UNGALVANIZED (BLACK) PIPE FITTINGS WITH A
PRESSURE RATING OF 210 KGF/CM2 AT 120OC. THREADS
CONFORM TO THE TAPER PIPE THREADS STANDARDS OF
JIS B 0203 AND THE ISO 7/1. LARGER SIZES AND TYPES
OF FITTINGS NOT LISTED BELOW ARE ALSO AVAILABLE.” NA.NA.731722
IMPA STORES ELBOW STEEL 90DEG 2 THREADED, FOR H.P. PIPE FITTING NA.NA.731724
IMPA STORES “ELBOW STEEL 90DEG 2-1/2, THREADED FOR H.P. PIPE
FITTING, HIGH PRESSURE, DROP FORGED STEEL,
UNGALVANIZED (BLACK) PIPE FITTINGS WITH A
PRESSURE RATING OF 210 KGF/CM2 AT 120OC. THREADS
CONFORM TO THE TAPER PIPE THREADS STANDARDS OF
JIS B 0203 AND THE ISO 7/1. LARGER SIZES AND TYPES
OF FITTINGS NOT LISTED BELOW ARE ALSO AVAILABLE.” NA.NA.731725
IMPA STORES “ELBOW STEEL 90DEG 3 THREADED, FOR H.P. PIPE
FITTING, HIGH PRESSURE, DROP FORGED STEEL,
UNGALVANIZED (BLACK) PIPE FITTINGS WITH A
PRESSURE RATING OF 210 KGF/CM2 AT 120OC. THREADS CONFORM TO THE TAPER PIPE THREADS STANDARDS OF
JIS B 0203 AND THE ISO 7/1. LARGER SIZES AND TYPES
OF FITTINGS NOT LISTED BELOW ARE ALSO AVAILABLE.” NA.NA.731726
IMPA STORES ELBOW STEEL 90DEG 1 FOR H.P. PIPE FITTING NA.NA.731721
IMPA STORES METRIC COARSE THREAD DIES, CARBON STEEL, M20 NA.NA.631728
IMPA STORES METRIC COARSE THREAD DIES, CARBON STEEL, M22 NA.NA.631729
IMPA STORES METRIC COARSE THREAD DIES, CARBON STEEL, M24 NA.NA.631730
IMPA STORES METRIC COARSE THREAD DIES, CARBON STEEL, M18 NA.NA.631727
IMPA STORES “DIE ROUND ADJ METRIC FINE, M3XP0.35XOD20MM
CARBON STEEL, THESE ROUND ADJUSTABLE DIES ARE
USED IN EITHER HAND STOCK HOLDERS OR MACHINE
HOLDERS. THESE DIES CAN BE ADJUSTED BY TURNING A
SMALL SET SCREW WHICH WILL CHANGE THE NOMINAL
SIZE OF THE DIES GIVING THEM A TIGHT OR LOOSE FIT
TO THE THREADS. MOST COMMONLY MADE OF CARBON
STEEL, BUT HIGH SPEED STEEL THREADS ARE ALSO
AVAILABLE.” NA.NA.631810
IMPA STORES Metric fine thread dies M5x0,5 mm NA.NA.631814
IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M6 NA.NA.631816
IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M8 NA.NA.631818
IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M8 NA.NA.631819
IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M10 NA.NA.631822
IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M10 NA.NA.631823
IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M10 NA.NA.631824
IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M12 NA.NA.631827
IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M12 NA.NA.631828
IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M12 NA.NA.631829
IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M14 NA.NA.631830
IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M14 NA.NA.631831
IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M15 NA.NA.631832
IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M16 NA.NA.631834
IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M16 NA.NA.631835
IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M18 NA.NA.631838
IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M18 NA.NA.631839
IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M18 NA.NA.631840
IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M20 NA.NA.631841
IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M20 NA.NA.631842
IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M20 NA.NA.631843
IMPA STORES METRIC FINE THREAD DIES NA.NA.631844
IMPA STORES DIE ROUND ADJ METRIC FINE M22XP1.5XOD50MM CARBON STEEL ****** NEUBRO NA.NA.631845
IMPA STORES “DIE ROUND ADJ METRIC FINE, M22XP1XOD50MM CARBON
STEEL, THESE ROUND ADJUSTABLE DIES ARE USED IN
EITHER HAND STOCK HOLDERS OR MACHINE HOLDERS.
THESE DIES CAN BE ADJUSTED BY TURNING A SMALL SET
SCREW WHICH WILL CHANGE THE NOMINAL SIZE OF THE
DIES GIVING THEM A TIGHT OR LOOSE FIT TO THE
THREADS. MOST COMMONLY MADE OF CARBON STEEL,
BUT HIGH SPEED STEEL THREADS ARE ALSO AVAILABLE.” NA.NA.631846
IMPA STORES “DIES ADJUSTABLE ROUND PIPE THREAD
DIE ROUND ADJ STRAIGHT THREAD, PF1/16X28TX38MM
CARBON STEEL ” NA.NA.632001
IMPA STORES DIE ROUND PIPE THREAD STRAIGHT ADJ PF1/8×28THREAD×38MM SKS NA.NA.632002
IMPA STORES DIE ROUND ADJ STRAIGHT THREAD, PF1/4X19TX38MM CARBON STEEL NA.NA.632003
IMPA STORES DIE ROUND ADJ STRAIGHT THREAD, PF3/8X19TX50MM CARBON STEEL NA.NA.632004
IMPA STORES DIE ROUND ADJ STRAIGHT THREAD, PF1/2X14TX50MM CARBON STEEL NA.NA.632005
IMPA STORES “DIE ROUND ADJ STRAIGHT THREAD, PF5/8X14TX63MM
CARBON STEEL” NA.NA.632006
IMPA STORES DIE ROUND ADJ STRAIGHT THREAD, PF3/4X14TX63MMCARBON STEEL NA.NA.632007
IMPA STORES “DIE ROUND ADJ STRAIGHT THREAD, PF7/8X14TX75MM
CARBON STEEL” NA.NA.632008
IMPA STORES DIE ROUND PIPE THREAD STRAIGHT ADJ PF1×11THREAD×75MM SKS NA.NA.632009
IMPA STORES “DIE ROUND ADJ STRAIGHT THREAD, PF1-1/8X11TX75MM
CARBON STEE” NA.NA.632010
IMPA STORES ADJUSTABLE ROUND DIES FOR PIPE THREADS NA.NA.632011
IMPA STORES DIE ROUND ADJ STRAIGHT THREAD, PF1-1/2X11TX90MM CARBON STEEL Cat name:IMPA. Cat no:632012. DIE ROUND ADJ STRAIGHT THREAD, PF1-1/2X11TX90MM CARBON STEEL NA.NA.632012
IMPA STORES “DIE ROUND ADJ STRAIGHT THREAD, PF1-3/4X11TX105MM
CARBON STEEL” NA.NA.632013
IMPA STORES “DIE ROUND ADJ STRAIGHT THREAD, PF2X11TX105MM
CARBON STEEL” NA.NA.632014
IMPA STORES SCREW PLATE SETS OK 47 NA.NA.632203
IMPA STORES “SCREW PLATE SET METRIC COARSE, #F48 M3 TO M10 18PCS/SET, Ordered from catalog IMPA: 632210
These sets are designed for cutting threads of a variety of sizes, easily, and all with one set. Suitable for jobs involving a wide range of on site threading work. There are single tap or three tap sets available in the same thread cutting range. When ordering, please specify the set number, thread cutting range, and thread type, (whitworth, metric, etc.), by indicating the exact code number.” NA.NA.632210
IMPA STORES “SCREW PLATE SET UNIFIED COARSE, #OK37 1/4 TO 1
20PCS/SET, THESE SETS ARE DESIGNED FOR CUTTING
THREADS OF A VARIETY OF SIZES, EASILY, AND ALL WITH
ONE SET. SUITABLE FOR JOBS INVOLVING A WIDE RANGE
OF ON SITE THREADING WORK. THERE ARE SINGLE TAP
OR THREE TAP SETS AVAILABLE IN THE SAME THREAD
CUTTING RANGE. WHEN ORDERING, PLEASE SPECIFY
THE SET NUMBER, THREAD CUTTING RANGE, AND
THREAD TYPE, (WHITWORTH, METRIC, ETC.), BY
INDICATING THE EXACT CODE NUMBER” NA.NA.632224
IMPA STORES SCREW PLATE SET PIPE THREAD 1/8 TO 1-1/4 22PCS/SET (WHITWORTH)***THREAD #R4 NA.NA.632254
IMPA STORES WRENCH TAP,STRAIGHT TYPE,NOMINAL SIZE 6 FOR M1-M6****No0,SKC JAPAN***** NA.NA.633401
IMPA STORES WRENCH TAP STRAIGHT TYPE FOR M1-10 200MM NA.NA.633402
IMPA STORES TAP WRENCHES, STRAIGHT, NOMINAL SIZE – 20MM NA.NA.633404
IMPA STORES WRENCH TAP T-TYPE FOR M5-10 NA.NA.633413
IMPA STORES DIE STOCK FOR 16mm O.D.ROUND DIE****SKC JAPAN**** NA.NA.633421
IMPA STORES ROUND DIE STOCKS, 20MM NA.NA.633422
IMPA STORES ROUND DIE STOCKS, 38MM NA.NA.633424
IMPA STORES ROUND DIE STOCKS, 50MM NA.NA.633425
IMPA STORES “STOCK FOR ROUND DIE 57MM, Ordered from catalog IMPA: 633426
Adjustable round die stocks. Made of steel. Select suitable diameter of stock to fit your round dies.” NA.NA.633426
IMPA STORES “LATHE DOG CAST-IRON BENT 38MM, BODY IS MADE OF
CAST IRON AND THE SQUARE HEAD SCREW OF
HARDENED STEEL. THE OPENING IS MACHINED WITH THE
FACE AT A RIGHT ANGLE. PLEASE INDICATE STRAIGHT
OR BENT TAIL WHEN ORDERING.” NA.NA.632320
IMPA STORES “LATHE DOG CAST-IRON BENT 50MM, BODY IS MADE OF
CAST IRON AND THE SQUARE HEAD SCREW OF
HARDENED STEEL. THE OPENING IS MACHINED WITH THE
FACE AT A RIGHT ANGLE. PLEASE INDICATE STRAIGHT
OR BENT TAIL WHEN ORDERING” NA.NA.632322
IMPA STORES “LATHE DOG CAST-IRON BENT 75MM, BODY IS MADE OF
CAST IRON AND THE SQUARE HEAD SCREW OF
HARDENED STEEL. THE OPENING IS MACHINED WITH THE
FACE AT A RIGHT ANGLE. PLEASE INDICATE STRAIGHT
OR BENT TAIL WHEN ORDERING.” NA.NA.632324
IMPA STORES DRILL CHUCKS WITH KEY 16.0MM NA.NA.632340
IMPA STORES 632352 DRILL SLEEVE MT#1X3 NA.NA.632352
IMPA STORES DRILL SLEEVE MT#2X3 NA.NA.632353
IMPA STORES Drill sleeves,MT 2×4,hole 2, overall length 124mm NA.NA.632354
IMPA STORES DRILL SOCKET FOR MORSE TAPER, MT#1X2 NA.NA.632362
IMPA STORES HEXAGON HEAD BOLTS WITH NUTS STAINLESS STEEL , M10X55 NA.NA.632364
IMPA STORES MORSE TAPER SHANK DRILL SOCKETS NA.NA.632365
IMPA STORES DRILL CHUCK ARBOR, Nominal No. 3 x 2, J.T. No. 3, M.T. No. 2, Overall Length-120 mm. NA.NA.632384
IMPA STORES “DRILL CHUCK ARBOR JT#1XMT#3, FOR USE WITH
DRILLING MACHINES, LATHES, ETC. WHEN ORDERING,
PLEASE SPECIFY NOMINAL NUMBERS.” NA.NA.632378
IMPA STORES “DRILL CHUCK ARBOR JT#2XMT#3, FOR USE WITH
DRILLING MACHINES, LATHES, ETC. WHEN ORDERING,
PLEASE SPECIFY NOMINAL NUMBERS.” NA.NA.632381
IMPA STORES “DRILL DRIFT ORDINARY #3 FOR, SOCKET & SLEEVE #3,
FOR REMOVING TAPER SHANKS WITHOUT ANY DAMAGE
FROM DRILL SOCKETS OR DRILLING MACHINES. THIS
IMPROVED TYPE WORKS MORE EFFICIENTLY AND IS
SAFER.” NA.NA.632393
IMPA STORES “LATHE CENTER H.S.S. TIPPED, MT#2, BODY IS MADE OF
TOOL STEEL WITH A HIGH SPEED STEEL TIP OR A
CARBIDE TIP. BOTH TYPES OF TIP ENDS ARE PROPERLY
HARDENED. THE SHANK IS GROUND TO MORSE TAPERS
AND THE INCLUDED ANGLE OF THE POINT IS 60O.” NA.NA.632403
IMPA STORES “LATHE CENTER H.S.S. TIPPED, MT#3, BODY IS MADE OF
TOOL STEEL WITH A HIGH SPEED STEEL TIP OR A
CARBIDE TIP. BOTH TYPES OF TIP ENDS ARE PROPERLY
HARDENED. THE SHANK IS GROUND TO MORSE TAPERS
AND THE INCLUDED ANGLE OF THE POINT IS 60O.” NA.NA.632404
IMPA STORES ROLLING CENTER MT#3 60DEG NA.NA.632423
IMPA STORES “ROLLING CENTER MT#4 60DEG, SPECIALLY DESIGNED TO
WITHSTAND HIGH-SPEED HEAVY-DUTY OPERATIONS.
INCORPORATED ARE A TAPER ROLLER BEARING, THRUST
BALL BEARING, BALL BEARING AND OTHER SPECIAL
BEARINGS.” NA.NA.632424
IMPA STORES “LIVE CENTER S-TYPE MT#4 195MM, THIS S TYPE IS
RECOMMENDED FOR USE ON PRECISION FINISHING
WORK WITH HIGH SPEED REVOLUTION.” NA.NA.632433
IMPA STORES “ROLLING CENTER BEVEL MT#2, 70DEG BEVEL DIAM
12X62MM, USED IN COMBINATION WITH A LATHE OR AN
EXTERNAL GRINDING MACHINE, THE BEVEL ROLLING
CENTER SERVES AS A CENTER PUSHER FOR STEEL PIPE
OR A WORKPIECE WITH A LARGE CENTRAL OPENING AND
WITHOUT A CENTERING HOLE.” NA.NA.632441
IMPA STORES EXTRACTOR SCREW SET 6’S FOR DRILL SIZE 2-10.3MM NA.NA.632487
IMPA STORES “ROTARY BAR CARBIDE TYPE-A 3MM SHANK/3MM
BLADE” NA.NA.632501
IMPA STORES “ROTARY BAR CARBIDE TYPE-A 6MM SHANK/4MM
BLADE” NA.NA.632502
IMPA STORES Rotary bur,carbide, TYPE-A, cylindrical flat end type,shank 6mm diam,blade 6mm diam,overall length 55mm NA.NA.632503
IMPA STORES ROTARY BUR CARBIDE TYPE-A, 6MM SHANK/8MM BLADE NA.NA.632504
IMPA STORES ROTARY BAR CARBIDE TYPE-A 6MM SHANK /9MM BLADE NA.NA.632505
IMPA STORES Rotary bur,carbide, Type-A, cylindrical flat end type,shank 6mm diam,blade 13mm diam,overall length 70mm NA.NA.632506
IMPA STORES ROTARY BAR CARBIDE TYPE-B, 3MM SHANK/3MM BLADE NA.NA.632511
IMPA STORES ROTARY BAR CARBIDE TYPE-B, 6MM SHANK/4MM BLADE NA.NA.632512
IMPA STORES CARBIDE ROTARY BURS; CYLINDRICAL RADIUS END; 6MM NA.NA.632513
IMPA STORES ROTARY BUR，CARBIDE，TYPE CYLINDER RADIUS END NA.NA.632514
IMPA STORES CARBIDE ROTARY BUR NA.NA.632515
IMPA STORES “ROTARY BAR CARBIDE TYPE-B 6MM SHANK/13MM
BLADE 16HELICAL” NA.NA.632516
IMPA STORES “ROTARY BUR CARBIDE TYPE-B, 6MM SHANK/13MM BLADE
32HELICAL, DESIGNED FOR THE EFFICIENT BEVELLING OF
GEARS, BURRING, PLANING, SHAPING, AND MILLING.
THESE ROTARY BURS ARE ADVANTAGEOUS FOR USE
WITH PORTABLE GRINDING TOOLS OF 10,000 R.P.M. OR
MORE. PLEASE SPECIFY THE TYPE, SIZE OF THE BLADE
AND THE SHANK WHEN ORDERING.” NA.NA.632517
IMPA STORES “ROTARY BUR CARBIDE TYPE-C, 3MM SHANK/3MM BLADE,
DESIGNED FOR THE EFFICIENT BEVELLING OF GEARS,
BURRING, PLANING, SHAPING, AND MILLING. THESE
ROTARY BURS ARE ADVANTAGEOUS FOR USE WITH
PORTABLE GRINDING TOOLS OF 10,000 R.P.M. OR MORE.
PLEASE SPECIFY THE TYPE, SIZE OF THE BLADE AND THE
SHANK WHEN ORDERING.” NA.NA.632521
IMPA STORES ROTARY BAR CARBIDE TYPE-C ; 6MM SHANK/4MM BLADE；IMPA Catalogue NA.NA.632522
IMPA STORES “ROTARY BUR CARBIDE TYPE-C, 6MM SHANK/8MM BLADE,
DESIGNED FOR THE EFFICIENT BEVELLING OF GEARS,
BURRING, PLANING, SHAPING, AND MILLING. THESE
ROTARY BURS ARE ADVANTAGEOUS FOR USE WITH
PORTABLE GRINDING TOOLS OF 10,000 R.P.M. OR MORE.
PLEASE SPECIFY THE TYPE, SIZE OF THE BLADE AND THE
SHANK WHEN ORDERING.” NA.NA.632523
IMPA STORES “ROTARY BAR CARBIDE TYPE-C, 6MM
SHANK/9MM BLADE” NA.NA.632524
IMPA STORES “ROTARY BAR CARBIDE TYPE-C 6MM SHANK/13MM
BLADE” NA.NA.632525
IMPA STORES CARBIDE ROTARY BURS; TREE SHAPE 6MM NA.NA.632531
IMPA STORES ROTARY BUR，CARBIDE，TYPE TREE SHAPE RADIUS NA.NA.632532
IMPA STORES ROTARY BUR, CARBIDE, TREE SHAPE RADIUS END, 6 X 8 MM NA.NA.632533
IMPA STORES ROTARY BUR CARBIDE TYPE-D, 6MM SHANK/9MM BLADE NA.NA.632534
IMPA STORES ROTARY BAR CARBIDE TYPE-D, 6MM SHANK/13MM BLADE NA.NA.632535
IMPA STORES ROTARY BAR CARBIDE TYPE-E, 3MM SHANK/3MM BLADE NA.NA.632541
IMPA STORES ROTARY BAR CARBIDE TYPE-E ; 6MM SHANK/4MM BLADE；IMPA Catalogue NA.NA.632542
IMPA STORES ROTARY BAR CARBIDE TYPE-E, 6MM SHANK/6MM BLADE NA.NA.632543
IMPA STORES CARBIDE ROTARY BURS NA.NA.632544
IMPA STORES “ROTARY BAR CARBIDE TYPE-E, 6MM
SHANK/9MM BLADE” NA.NA.632545
IMPA STORES “ROTARY BAR CARBIDE TYPE-E 6MM SHANK/13MM
BLADE 16HELICAL” NA.NA.632546
IMPA STORES “ROTARY BUR CARBIDE TYPE-E, 6MM SHANK/13MM BLADE
32HELICAL, DESIGNED FOR THE EFFICIENT BEVELLING OF
GEARS, BURRING, PLANING, SHAPING, AND MILLING.
THESE ROTARY BURS ARE ADVANTAGEOUS FOR USE
WITH PORTABLE GRINDING TOOLS OF 10,000 R.P.M. OR
MORE. PLEASE SPECIFY THE TYPE, SIZE OF THE BLADE
AND THE SHANK WHEN ORDERING.” NA.NA.632547
IMPA STORES “ROTARY BUR CARBIDE TYPE-F, 3MM SHANK/3MM BLADE,
DESIGNED FOR THE EFFICIENT BEVELLING OF GEARS,
BURRING, PLANING, SHAPING, AND MILLING. THESE
ROTARY BURS ARE ADVANTAGEOUS FOR USE WITH
PORTABLE GRINDING TOOLS OF 10,000 R.P.M. OR MORE.
PLEASE SPECIFY THE TYPE, SIZE OF THE BLADE AND THE
SHANK WHEN ORDERING” NA.NA.632551
IMPA STORES ROTARY BUR, CARBIDE, TYPE: CONE SHAPE RADIUS END(E) & TREE SHAPE POINTED END(F), SHANK DIA-6 mm(both) , BLADE DIA- 8 mm & 4 mm. NA.NA.632552
IMPA STORES “ROTARY BUR CARBIDE TYPE-F, 6MM SHANK/8MM BLADE,
DESIGNED FOR THE EFFICIENT BEVELLING OF GEARS,
BURRING, PLANING, SHAPING, AND MILLING. THESE
ROTARY BURS ARE ADVANTAGEOUS FOR USE WITH
PORTABLE GRINDING TOOLS OF 10,000 R.P.M. OR MORE.
PLEASE SPECIFY THE TYPE, SIZE OF THE BLADE AND THE
SHANK WHEN ORDERING.” NA.NA.632553
IMPA STORES ROTARY BAR CARBIDE TYPE-G-6MM SHANKJBMM BLADE NA.NA.632556
IMPA STORES “ROTARY BUR CARBIDE TYPE-G, 6MM SHANK/9MM BLADE,
DESIGNED FOR THE EFFICIENT BEVELLING OF GEARS,
BURRING, PLANING, SHAPING, AND MILLING. THESE
ROTARY BURS ARE ADVANTAGEOUS FOR USE WITH
PORTABLE GRINDING TOOLS OF 10,000 R.P.M. OR MORE.
PLEASE SPECIFY THE TYPE, SIZE OF THE BLADE AND THE
SHANK WHEN ORDERING.” NA.NA.632557
IMPA STORES “ROTARY BAR CARBIDE TYPE-G 6MM SHANK/13MM
BLADE 16HELICAL” NA.NA.632558
IMPA STORES “ROTARY BUR CARBIDE TYPE-G, 6MM SHANK/13MM BLADE
32HELICAL, DESIGNED FOR THE EFFICIENT BEVELLING OF
GEARS, BURRING, PLANING, SHAPING, AND MILLING.
THESE ROTARY BURS ARE ADVANTAGEOUS FOR USE
WITH PORTABLE GRINDING TOOLS OF 10,000 R.P.M. OR
MORE. PLEASE SPECIFY THE TYPE, SIZE OF THE BLADE
AND THE SHANK WHEN ORDERING.” NA.NA.632559
IMPA STORES ROTARY BUR，CARBIDE，TYPE CONE SHAPE NA.NA.632561
IMPA STORES “ROTARY BAR CARBIDE TYPE-H 6MM SHANK/9MM
BLADE” NA.NA.632562
IMPA STORES TOOL BIT RECTANGULAR FLAT HSS 10X16X160MM NA.NA.632621
IMPA STORES TOOL BIT MATERIAL，16X16X300 mm NA.NA.632675
IMPA STORES “TOOL BIT MATERIAL HSS, RECTANGULAR 5X16X300MM,
HIGH SPEED, STEEL TOOL BIT MATERIAL IS NOT
HARDENED AS IT IS MADE FOR GENERAL USE. THE
MATERIAL IS AVAILABLE IN TWO TYPES, SQUARE AND
RECTANGULAR, TO SUIT THE USERS REQUIREMENTS.
THESE PLATES ARE SUPPLIED IN 300 MM LENGTH PIECES.
RECTANGULAR” NA.NA.632686
IMPA STORES “TOOL BIT MATERIAL HSS, RECTANGULAR 3X16X300MM,
HIGH SPEED, STEEL TOOL BIT MATERIAL IS NOT
HARDENED AS IT IS MADE FOR GENERAL USE. THE
MATERIAL IS AVAILABLE IN TWO TYPES, SQUARE AND
RECTANGULAR, TO SUIT THE USERS REQUIREMENTS.
THESE PLATES ARE SUPPLIED IN 300 MM LENGTH PIECES.
RECTANGULAR” NA.NA.632682
IMPA STORES TOOL BIT SINGLE POINT NA.NA.632715
IMPA STORES SINGLE POINT TOOLS NA.NA.632755
IMPA STORES “TOOL WITH CARBIDE TIP SINGLE, #37-3 RIGHT HAND
19X19X140MM, FOR SQUARE SHANK HOLDERS. THE
CARBIDE TIPS ARE FINELY GROUND TO BE READY FOR
USE AND ARE COVERED WITH AN EASY TO REMOVE
CELLULOSE SHEATH. CHOOSE THE CUTTER MOST
SUITABLE FOR THE WORK YOU ARE DOING FROM THE
EXAMPLES BELOW. PLEASE SPECIFY WHETHER YOU
REQUIRE LEFT OR RIGHT HAND TIPS. MODEL 37 RIGHT” NA.NA.632743
IMPA STORES “TOOLS SINGLE POINT
TOOL WITH CARBIDE TIP SINGLE, #43-1 STRAIGHT 10X16X100MM ” NA.NA.632779
IMPA STORES WELDERS GLOVES. 6 PAIRS *** UNITOR PRODUCT NA.NA.632786
IMPA STORES “TOOL WITH CARBIDE TIP SINGLE, #49-2 RIGHT HAND
16X16X120MM, FOR SQUARE SHANK HOLDERS. THE
CARBIDE TIPS ARE FINELY GROUND TO BE READY FOR
USE AND ARE COVERED WITH AN EASY TO REMOVE
CELLULOSE SHEATH. CHOOSE THE CUTTER MOST
SUITABLE FOR THE WORK YOU ARE DOING FROM THE
EXAMPLES BELOW. PLEASE SPECIFY WHETHER YOU
REQUIRE LEFT OR RIGHT HAND TIPS. MODEL 49 RIGHT” NA.NA.632804
IMPA STORES “TOOL WITH CARBIDE TIP SINGLE, #51-2 RIGHT HAND
16X16X160MM, FOR SQUARE SHANK HOLDERS. THE
CARBIDE TIPS ARE FINELY GROUND TO BE READY FOR
USE AND ARE COVERED WITH AN EASY TO REMOVE
CELLULOSE SHEATH. CHOOSE THE CUTTER MOST
SUITABLE FOR THE WORK YOU ARE DOING FROM THE
EXAMPLES BELOW. PLEASE SPECIFY WHETHER YOU
REQUIRE LEFT OR RIGHT HAND TIPS. MODEL 51 RIGHT” NA.NA.632812
IMPA STORES BORING TOOL NA.NA.633052
IMPA STORES TOOL BIT TIP WELDED HSS #41-16 16×16×180MM NA.NA.633057
IMPA STORES TOOL BIT TIP WELDED HSS #42-16 16×16×180MM NA.NA.633062
IMPA STORES HIGH SPEED TIP WELDED,BORING TOOL,MODEL No.51 NA.NA.633067
IMPA STORES “TOOL BITS HIGH SPEED STEEL TIP WELDED – INTERNAL THREADING
TOOL #52;TOOL BIT TIP WELDED HSS, INTERNAL THREAD-16
16X16X180MM ” NA.NA.633072
IMPA STORES TOOL BIT HOLDERS NA.NA.633201
IMPA STORES SPRING CUT OFF TOOL HOLDERS NA.NA.633216
IMPA STORES KNURLING TOOL HOLDER NO.1 NA.NA.633241
IMPA STORES “KNURL PITCH 21 STRAIGHT LINE, OD16MM, INDIVIDUALLY
HOB-CUT FROM EXTRA HIGH CARBON TOOL STEEL, HEAT
TREATED, TEMPERED AND TESTED TO OBTAIN SHARP,
PERFECTLY FORMED TEETH IN EVERY KNURL. CAN BE
FURNISHED IN COARSE, MEDIUM OR FINE GRADE AND IN
EITHER STRAIGHT LINE OR DIAMOND PATTERN.” NA.NA.633252
IMPA STORES KNURL FOR TOOLS (TYPE- DIAMOND PITCH-21) NA.NA.633255
IMPA STORES VALVE SEAT CUTTER, 1″-4″ COMPLETE NA.NA.633451